(Preheating required under a temperature 0 ☌ (32 ☏) or below) AR+: camera can be installed on the 6-axis robotic arm ARCAM, which can be controlled from ARcaptur software (also compatible with other systems).Ĥ0 W (body only, when 3G SDI x 4 is output)Ħ0 W (maximum power when all accessories are connected andĮach output terminal is outputting at maximum).Lens and pantilt functions can be controlled from RCCP-1. Telemetrics: camera can be mounted on the PT-LP-S5 pantilt head.Lens and pantilt functions can be controlled from Vinten’s HDVRC. Vinten-Radamec: camera can be mounted on the FHR-35 pantilt head.Currently, it as under development, so that many other functions could be controlled in the future. UB300 is not compatible with Panasonic PanTilt systems AW-PH360 and AW-PH650Īdditionally, AK-UB300 is going to be supported by 3rd party robotic systems.Some functions may not work initially.The same cable can be used to be connected to pantilt head. UB300 is using the same protocol and interface as previous AK-HC1800/1500 models.3G-SDI signals cannot be connected through the pantilt head. However, camera must be powered externally, and pan/tilt cannot control camera power on/off. UB300 is compatible with Panasonic PanTilt systems AW-PH400 and AW-PH405.The AK-UB300 can be used in PanTilt configuration, although with some limitations. Intelligent function: it will automatically correct the image level and color temperature in accordance with the change at the outdoor where the camera is used. ND filters: thanks to a 4-position ND filter wheel (ND1/4, ND1/16, ND1/64), camera can be used in very bright conditions.Compatible with pan/tilt systems: thanks to its compact body, light weight and LAN control, it can be mounted on a pantilt configuration, from both Panasonic (AW-PH405 or AW-PH400) and 3rd party systems (Vinten-Radamec, Telemetrics, AR+).Control via LAN simplifies the installation and makes the camera compatible with a variety of remote controllers. Supporting IP streaming and IP control: Streaming video output is available in up to four simultaneous H.264 streams, at a wide range of data rates.The HD cropped area can be controlled by Panasonic remote controllers, like AW-RP50 or AW-RP120. HD cropping function, to get a cropped HD image from the 4K picture, with 4 times more zoom.Simultaneous UHD (4x 3G-SDI) and HD (1x 3G-SDI and 1x HD-SDI) outputs: the Quad-SDI output board is included as standard, and in the future, it could be swapped with other optional 4K outputs, such as optical fiber.A 4K large-format sensor is used to achieve excellent image quality, by making maximum use of incident light. B4 lens mount: applying built-in conversion lens, any existing 2/3-type lens can be used.Or even exceeds any previous HD box camera in terms of sensitivity and S/N ratio. High Sensitivity (F11/2000lx) and Low Noise (S/N 60dB): To maximize ease-of-use and handle a wide range of needs, the AK-UB300 has a high sensitivity mode that compares to.A multitude of functions allows versatility in any application. It can achieve 4K image quality even when shooting low-budget content in a small-scale studio and it is also an excellent choice for aerial shooting.Įven in HD, the AK-UB300 is an excellent replacement for existing box cameras, offering a smooth migration to 4K and IP-based systems. The AK-UB300 provides the precise camerawork and high image quality that you need for sports, remote studios, weather information, live concerts and other applications.
0 Comments
Leave a Reply. |